Preparing Instrument Wood
Making music is always fun, but making it with your instrument is much better. The musical instruments can be crafted from simple materials found around the house one of them is wood. Whether you are a professional musician or just a curious individual you can use this material to make a variety of instruments. Firstly, you should select high-quality wood, which will give you a fine musical instrument. Go for naturally dried ones since they have a tight even pattern.
Tonewoods are the best to get the job done, especially if you want to make the stringed instruments such as violins. Rosewoods, Ebony, spruces, and Cedars are some of the tone woods you can select from.
From wood, you can craft a flute, a simple guitar, a simple drum and a shaker. But the main challenge is to master the art of preparing your wood for these crafts. When you consider wood as your raw material, you have to prepare it first through various techniques. This include:
Using Of Electric Sanders
Electric sanders are best when it comes to the preparation of wood. First, start by inspecting the wood. Note down any cracks, holes or loose joints. In case you find any, use the tip of the screwdriver to fill it and give it time to dry up. The better the wood preparation, the better the result. Sanding is a crucial step when it comes to wood preparation. This process is made easy and quick when one uses an electric sander. It smoothens the dry fillers, removes small scratches while opening up the wood and this makes painting easier. Sanding removes the surface glaze created during the manufacturing of wood.
When working on flat boards, always sand parallel to avoid scratches and keep the sander moving to avoid making a hole in the wood.
Consider using a belt sander because they are the best when it comes in smoothing rough edges. Subsequently, electric sanders can be used to remove pants and vanishes from wood.
You might want to know if priming is necessary before one paints wood. This is a necessary step, because if you omit it, you might get disappointed with the final results.
So Why Prime?
The main purpose of a primer is to provide a solid base coat and fill the grain present in the wood, thus making the finish coat appear smoother. A primer has high solid content, which makes this process a success.
In addition, its binding agents are very sticky than that of most paints, so it attaches itself better on wood than most paints. On the other hand, paint will stick on prime better than on wood.
It will also help you to achieve a significant color change on your wood.
All the above advantages are based on the fact that a good primer will prevent bleeding through and will block stains. This ability is important when one is working with certain kinds of woods.
What If You Don’t want To Prime Your Wood?
Well, if you don’t seal your wood with primer, the first coat of paint will be blotchy and uneven. More so, the water available in most wood will raise the patterns in it, especially around knots.
Applying the second coat of painting might correct the above errors, however since you never applied an undercoat there will be high chances that your paint won’t last long. It might start peeling off after a year or two.
If you don’t use a primer when painting, certain woods dark spots might unveil around knots. You won’t be able to get rid of these spots, no matter how many coats of paint you use when reapplying wood.
How Is The Process Of Priming Done?
Sand your wood so as to open the grains, you will need to ensure the surface is clean. Apply the primer by using a spray or brush since a single coat is all you might need. Once the primer has dried up, it’s advisable to sand it again slightly, to achieve best results, you should paint within seven days of priming.
What Are Some Precautions That One Should Consider When Priming?
Ensure that the area where you are priming in is well ventilated. You are advised to wear a respirator even when you are using a latex primer.
Once you are done, clean up your apparatus to keep them fresh and set for the next job.
Which Wood Primers Are Best To Get The Job Done
The most preferred primers are oil-based or latex. Since most people are not patient enough to wait until it dries so as to be coated, most paint producers have manufactured a new, fast-drying technology for both latex and oil-based primers. Once applied, you will only wait for some few hours before top coating your surface.
Please Note: when using oil primer on certain kinds of woods, it might penetrate deeper into the wood, and this will prevent tannin stains.
Once you are done with the priming process, painting should be your next step. One is advised to choose the right type of paint and color, which will get your work done. Read the labels as they provide more information about the paint.
What Kinds Of Brushes Should One Use When Painting?
There are two main types of brushes. These are Angle brush and straight brush. Both are good when it comes to the painting process, but when you are using latex for the painting you are advised to use a brush with exploded tips.
A good brush will take in the correct amount of paint into its bristles and will leave a smooth finish on your wood.
The Painting Technique
The technique requires you start painting at the top of your wood moving toward the center. When you notice the brush is dragging, stop and dip it again in the paint. The main aim in brushing is to quickly paint an area with adequate amounts of paints and then blend and smooth it by the tipping process. The more the paint the brush carries the faster you will coat your wood.
You should tap your brush against the pail so as to avoid dripping. The paint will flow smoothly on your wood surface, try an put a second coat to get a fine finish.
Please Note: don’t let paint settle for a while before tipping. Additionally, you shouldn’t force dry paint of the brush. The main goal in painting is to create a uniformed surface of thickness rather than to make it sag.
In conclusion, you will be able to make beautiful music instruments from wood once you implement the above techniques. Not only will it be fun when working with a pure wood made instrument, but also it will open your musical world to diverse cultures.